A temperature sensor error has been detected in the dishwasher.
This indicates a functional error with the temperature sensor.
With the dishwasher empty, add detergent and run a cycle. If the problem persists, turn off the dishwasher's circuit breaker switch and contact an authorized Samsung service center.
A heater error has occurred in the dishwasher.
This error pertains to a high temperature heating issue.
Turn off the dishwasher and contact an authorized Samsung service center for assistance.
There is a low water level error in the dishwasher.
The error indicates that the water level is lower than expected during operation.
Ensure that the water supply is adequate and check for any blockages or leaks. If the issue remains, contact an authorized Samsung service center.
The half load function error has been detected.
An operational error with the half load function is present.
Attempt a full load cycle to see if the error persists. If so, contact an authorized Samsung service center.
A reflector function error is occurring in the dishwasher.
This happens if flatware or dishware interferes with the water reflector.
Check if any items are obstructing the water reflector. If not, close the water supply valve and contact an authorized Samsung service center.
A communication error is detected within the dishwasher.
This indicates a failure in the internal communication of the appliance.
Turn off the dishwasher and restart it. If the error continues, contact an authorized Samsung service center.
An over-level water error is indicated in the dishwasher.
This functional error shows that the water level is too high.
Close the water supply valve, turn off the circuit breaker switch, and contact an authorized Samsung service center.
A leakage error has been detected in the dishwasher.
This indicates a leak within the dishwasher system.
Inspect for visible leaks, turn off the dishwasher, and contact an authorized Samsung service center for repairs.
A button error is present in the dishwasher.
This functional error occurs when there is a malfunction with one of the control buttons.
Turn off the dishwasher and try to start it again. If the error persists, contact an authorized Samsung service center.
The child lock indicator is on, which restricts button operations.
Child Lock is set to prevent accidental operations.
To deactivate Child Lock, refer to the control panel instructions in the user manual. If further assistance is needed, contact Samsung support.